A stone panel made of artificial material is made up of two layers, the back surface and the edge. It is simple to put it on the wall. The thickness of the edges and back surfaces should be about 80 percent of the total thickness silikonová forma na obklad. The wall's thickness and height should be between 20 and 50 mm. The depth must not exceed 8 millimeters. When the adhesive is applied the panel will remain on the wall with no warping or cracks.
When an artificial stone panel is installed, the inorganic component and the resin component are mixed in a ratio of 1:1 to 5:1. The resin component is added at a ratio of 7-30 percent of the weight of the artificial stone body, excluding the support. The final product is designed to have the appearance of natural stone. It will last for a long time, which means you don't have to fret about it getting faded. A press die jig can be used to make artificial stone panels. The jig is designed with long walls that are connected by recesses. The cross-walls are recessing on both sides. This type of jig can be predetermined in strength and can be installed. This makes the preparation for installation much easier. It also guarantees the desired texture and shape. There are numerous advantages to this method. The stone panel made of artificial stones is composed of resin and inorganic components. The upper mold is then pressed along with the support to allow to be installed. The stone panel will maintain its natural texture and strength when it is set. This design reduces wear on the jig, making it easier to set up. Because installation is less complicated this type of installation produces a better product. The primary benefit of an artificial stone panel is its ease of installation. The jig is constructed of resin and inorganic components. The cross-wall of the jig is able to fit into the grooves on the programme plate. You can recess the cross-walls on either side. This allows you to adjust the intensity and angle of the lighting forma umelý kameň. The asperity is an opening in the wall that is recessed on both sides. The wall panel is produced by using a press-die jig. The horizontal and vertical wall sections engage in recesses in the jig, and the cross-walls are set back on both sides. The main element of artificial stone is the jig. It is used in the production of architectural and decorative materials. It is a preferred choice due to its superior appearance and ease of installation.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
July 2022
Categories |